The KZ-XDA family combines RO and UP outlets in three source-listed capacities for laboratory workflows. This page preserves the exact model designations and reports only specifications visible in the supplied product archive.
Select specification
Changing the model updates the specifications below and the model attached to your enquiry.
ModelKZ-XDA-60L
Rated output60 L/h
Power150 W
Dimensions (L×W×H)27×60×62 cm
ModelKZ-XDA-100L
Rated output100 L/h
Power300 W
Dimensions (L×W×H)40×61×93 cm*
ModelKZ-XDA-150L
Rated output150 L/h
Power300 W
Dimensions (L×W×H)52×61×133 cm
Technical Specifications
| Model | KZ-XDA-60L |
|---|---|
| Rated output | 60 L/h |
| Power | 150 W |
| Dimensions (L×W×H) | 27×60×62 cm |
| Power supply | AC 220 V / 50 Hz |
| Feed-water pressure | 0.15–0.6 MPa |
| Operating pressure | 0.4–0.6 MPa |
| UP resistivity | 18.2 MΩ·cm at 25°C |
| UP TOC | <10 ppb |
| UP heavy-metal ions | <0.1 ppb |
| UP microorganisms | <1 cfu/ml |
| RO conductivity | N/A — the supplied artwork omits the numeric value |
| Model | KZ-XDA-100L |
|---|---|
| Rated output | 100 L/h |
| Power | 300 W |
| Dimensions (L×W×H) | 40×61×93 cm* |
| Power supply | AC 220 V / 50 Hz |
| Feed-water pressure | 0.15–0.6 MPa |
| Operating pressure | 0.4–0.6 MPa |
| UP resistivity | 18.2 MΩ·cm at 25°C |
| UP TOC | <10 ppb |
| UP heavy-metal ions | <0.1 ppb |
| UP microorganisms | <1 cfu/ml |
| RO conductivity | N/A — the supplied artwork omits the numeric value |
| Model | KZ-XDA-150L |
|---|---|
| Rated output | 150 L/h |
| Power | 300 W |
| Dimensions (L×W×H) | 52×61×133 cm |
| Power supply | AC 220 V / 50 Hz |
| Feed-water pressure | 0.15–0.6 MPa |
| Operating pressure | 0.4–0.6 MPa |
| UP resistivity | 18.2 MΩ·cm at 25°C |
| UP TOC | <10 ppb |
| UP heavy-metal ions | <0.1 ppb |
| UP microorganisms | <1 cfu/ml |
| RO conductivity | N/A — the supplied artwork omits the numeric value |
Model Comparison
| Model | Rated output | Power | Dimensions (L×W×H) |
|---|---|---|---|
| KZ-XDA-60L | 60 L/h | 150 W | 27×60×62 cm |
| KZ-XDA-100L | 100 L/h | 300 W | 40×61×93 cm* |
| KZ-XDA-150L | 150 L/h | 300 W | 52×61×133 cm |
Dimensions marked with * differ between the source parameter table and the dimension graphic — see Source Notes below.
System Design & Functions
- Separate RO and UP dispensing outlets support general purified-water and ultrapure-water workflows.
- LCD operating-status display and online resistivity monitoring are shown in the supplied product material.
- Automatic RO-membrane flushing and multi-stage filtration are documented system functions.
- Electrophoretic spray-finished cabinet, terminal filter and a UV-sterilization arrangement are shown in the source material.
- The source graphics conflict on tank construction: one calls it ABS and another calls it 304 stainless steel. Tank material must be confirmed in the final technical agreement.
Applications
- Electrochemistry, spectrophotometry, microbiological culture and reagent preparation.
- Cell culture, PCR, IVF, protein purification and electrophoresis.
- Biochemistry, proteomics, genomics and immunoanalysis.
Installation & Selection
- Confirm feed-water quality, inlet pressure, drainage, grounded AC 220 V power and service clearance before installation.
- Select the 60, 100 or 150 L/h model from actual peak demand and duty cycle; the archive does not provide a model-selection formula.
- Final consumables, storage arrangement, tank material and water-quality acceptance criteria must be recorded in the approved technical agreement.
Source Notes
- The numeric RO-conductivity threshold is not stated in the supplied artwork and is therefore reported as N/A.
- For KZ-XDA-100L, the parameter table states 40×61×93 cm while a separate dimension graphic appears inconsistent; the table value is reproduced here and must be confirmed before ordering.
- The archive provides no named compliance standard, warranty term or product video; these items are N/A pending confirmed manufacturer documentation.